Differences

This shows you the differences between two versions of the page.

--- hypervisor:base:storage [2015/03/05 01:35]
admin [Create a Storage Repository]
+++ hypervisor:base:storage [2015/03/05 12:44]
admin [Delete a Storage Repository]
@@ Line 99: / Line 99: @@
 If you do not already have a device to use as repository, create a logical volume on volume group.
 <code>
-> lvcreate --size 30G -n LocalStorage xenvg
+> sudo lvcreate --size 13G -n Xsr0 Xvg0
 </code>
@@ Line 110: / Line 111: @@
 You should see your partition in a line such as:
 <code>
-Disk /dev/mapper/xenvg-LocalStorage: 32.2 GB, 32212254720 bytes
+...
+Disk /dev/mapper/Xvg0-Xsr0: 13.7 GB, 13744734208 bytes
+...
 </code>
 ==== Register the logical volume for use with XAPI ====
 <code>
-> xe sr-create type=ext name-label='LocalStorage' device-config:device=/dev/mapper/xenvg-LocalStorage
+> xe sr-create type=ext name-label='X-Local-SR' device-config:device=/dev/mapper/Xvg0-Xsr0
 </code>
 This will take a while if the volume is large, it will return the SR UUID.
@@ Line 121: / Line 124: @@
 Display the storage repository:
 <code>
-> xe sr-list name-label='LocalStorage'
+> xe sr-list name-label='X-Local-SR'
 </code>
@@ Line 188: / Line 191: @@
 </code>
-NOTE: at this stage the logical volume will still exist in the LVM partition.
+NOTE: at this stage the logical volume will still exist in the LVM partition, you could also use the //**xe sr-destroy**// command to totally wipe out the SR, loosing everything that was on it!
 ===== Using NFS =====