A PCRE internal error occured. This might be caused by a faulty plugin

**This is an old revision of the document!** ----

A PCRE internal error occured. This might be caused by a faulty plugin

====== Install Release 201403 ====== In case you didn't do that already, you are invited to read the following sections before you launch the installation: * [[install:start|Base Installation]] * [[install:preparation|Preparing the Machine (and USB Key)]] * [[install:disk-partition|Disk Partitioning]] Then simply follow the [[install:base-up6|Base Installation wiki page.]] Once the process completed, after a first system update, you'll have a shiny new 3.11 kernel based LMDE install. ===== A Brave New World ===== This wiki initiated as a way for me to remember the various steps I took to setup my working environment. As you might have read before, I initially installed LMDE on my (old) MacBook 5,1 unibody. Although I've been totally satisfied with the performances I got from this little horse (Core2 Duo 2.4GHz - 4MB RAM - 256GB SSD) an unfortunate error burned it's USB ports and WiFi. This situation rendered the machine barely usable as a working tool and I had to make the difficult decision to separate myself from my faithful work machine... Chance brought me the opportunity to acquire a Clevo H150RW Laptop (Intel Core i7-2720QM quad-core 2.20-3.30GHz - 8GB RAM - 512GB 5200RPM HD) on which I decided to install a brand new LMDE 201403 Cinnamon operating system. As one can expect, this brought me new challenges, starting with the WiFi not working "out of the box". To identify the problem my first will was to delve a little deeper in the hardware configuration of the machine. I was surprised not to find the usual "System Profiler" application in Cinnamon.